Architectural Elements (P9)
In acoustically or vibration sensitive buildings, often significant non-structural
elements are used to prevent the transfer of noise or vibration. These components
require restraint in seismically prone areas. Design and selection data for
hardware to be used to accomplish this task are included in this section.
Data here is of interest to specifiers, architects, installation contractors
and design professionals involved in the restraint selection process.
- General Description (P9.1)
- (Under Construction) A general description of these pieces of
hardware and their function are provided in this section.
- Perimeter Pads (Perimeter Restraint for Floating
Floors) Submittal Data (P9.2.3)
- (Under Construction) Design information is provided in this section.
- KSWC (Ceiling Cable Restraint Kit) Submittal
Data (P9.3.1)
- (Under Construction) Design and capacity information for the
KSWC cable kit offered by Kinetics Noise Control is provided in this section.
- PSB (Embedded Wall Restraint) Submittal Data
(P9.4.1)
- (Under Construction) Design information is provided in this section.
- IPRB (Top of Wall Restraint Angle) Submittal
Data (P9.4.2)
- (Under Construction) Design information is provided in this section.
- KSWB (Seismically Rated Wall Mounting Isolation
Clip) Submittal Data (P9.4.3)
- (Under Construction) Design information is provided in this section.
- Selection Information (P9.5)
- (Under Construction) Design Selection and guidance information
to be used in conjunction the various hardware components listed above are
summarized in this document.
- Installation Instructions (P9.6)
- (Under Construction) Comprehensive Installation Instructions
to be used in conjunction the various hardware components can be found in
this segment of the chapter.
FFR-1
(Embedded Restraint for Jack-up Floating Floors) Submittal Data (P9.2.1)