Other Required Components (P8)
Proper restraint design for many suspended equipment applications requires
the use of additional hardware "accessory" items. Design and selection data
for these components is included in this section.
Data here is of interest to specifiers, installation contractors and design
professionals involved in the restraint selection process.
- General Description (P8.1)
- (Under Construction) A general description of these pieces of
hardware and their function are provided in this section.
- KHRC-P (Rod Stiffener Clamps for Pipe) Submittal
Data (P8.2.2)
- (Under Construction) Design information is provided in this section.
- KSCA (Cable/Strut Attachment Bracket) Submittal
Data (P8.2.4)
- (Under Construction) These components are included in many of
the cable kits, but are also available separately. Design information is
provided in this section.
- KSUA (Cable Attachment Bracket) Submittal
Data (P8.2.5)
- (Under Construction) These components are included in many of
the cable kits, but are also available separately. Design information is
provided in this section.
- KSCC (Cable/Strut Attachment Bracket) Submittal
Data (P8.2.6)
- (Under Construction) These components are included in many of
the cable kits, but are also available separately. Design information is
provided in this section.
- Cable Hardware Selection Information (P8.3)
- (Under Construction) Design Selection and guidance information
to be used in conjunction the various suspended equipment hardware components
are summarized in this document.
- Cable Hardware Installation Instructions (P8.4)
- (Under Construction) Comprehensive Installation Instructions
to be used in conjunction the various hardware components can be found in
this segment of the chapter.
KHRC-A
(Rod Stiffener Clamps for Angles) Submittal Data (P8.2.1)