Seismic Home > Products > QuakeLoc™ Connector

KINETICS™

QuakeLoc™ Seismic Cable Restraint Connector

KINETICS QuakeLoc™ Connector is featured in our new lineup of standard seismic cable restraint systems. Sure to be a contractor favorite, the QuakeLoc™ connector quickly and easily fastens cables used in the seismic restraint of piping, duct, electrical cable trays, and suspended equipment. QuakeLocâ„¢ is proudly made in the USA.

Seismic Cable Restraint Systems carry tension only loads along the axis of the cable. They are used in pairs 180-degrees apart to restrain pipe, duct, electrical distribution systems or equipment in each axis. Cable restraints provide a load path between the building and the restrained component to ensure that it moves with the building. Bracing is required on both primary axes for all restrained systems. Spacing is determined by the building code and specifying engineer. Cable restraints are required for isolated systems as rigid restraints such as strut will short circuit the isolation.

Kinetics QuakeLoc™ connector is available for purchase as part of Kinetics QuakeKit-P (Pipe), QuakeKit-D (Duct), and QuakeBulk seismic cable restraint systems. Kinetics QuakeKits are competitively priced and offer substantial labor savings when compared to competitors systems. Each kit includes the necessary hardware to connect to suspended components. Hardware to attach QuakeKit systems to concrete, steel or wood structures is also available.

Seismic Cable Restraint Connector

QUAKE KITS

Model Cable Diameter Cable Length Max Cable Tension
QuakeKit-P/D-2 1/8 in 3 mm 15 ft 4.57 m 1000 lbs 454 kg
QuakeKit-P/D-3 3/16 in 5 mm 15 ft 4.57 m 2100 lbs 953 kg
QuakeKit-P/D-4 1/4 in 6 mm 15 ft 4.57 m 3350 lbs 1520 kg

QuakeKit-D for Duct, Suspended Equipment and Electrical

Kinetics QuakeKit-D is specifically designed to provide the necessary components to properly restrain duct, electrical components and suspended equipment. Each prepackaged kit contains:

QuakeKit-D for Duct, Suspended Equipment and Electrial

QuakeKit-P for Piping

Building code requires piping to be braced both in transverse and longitudinal directions. Kinetics QuakeKit-P is specifically designed to provide the necessary components to properly restrain a piping system. Each prepackaged kit contains:

QuakeKit-P for Piping

QuakeBulk

Kinetics QuakeBulk is a universal kit specially designed for application where more than 15-ft of cable will be required. Bulk cable sold separately. The prepackaged kit contains:

QuakeBulk
Request A Quote
Videos
Resources
QuakeKits
Attachment Details
AutoCAD Details
Attachment Hardware
KHRC Adjustable Angle Stiffener
KCHB Clevis Hanger Brace
KSBC Seismic Beam Clamp
Additional Information
Share
MADE IN USA