Perforated Co-Polymer Panels, Model KSP

Description

A perforated co-polymer panel reinforced with an aluminum frame for excellent durability and chemical resistance. Easily cleaned with isopropyl alcohol and a cloth.

Composition

A 1/16-inch thick perforated co-polymer is formed on two sides over a rigid aluminum frame. A 2" thick fiberglass sound absorber is encapsulated in a heat sealed PVC bag inside the frame.

Acoustical Performance

Frequency, Hz	125	250	500	1000	2000	4000	NRC
Sound Absorption per ASTM C-423, A-Mounting
Absorption Coefficient	.22	.77	1.12	1.00	.78	.57	.90
Note: Stand off brackets (optional) will increase sound absorption.
*Testing for the Model KNP perforated metal panel is submitted as equal to the Model KSP panel.

Fire Test Data

Class A per ASTM E84

Applications

Z-Clips (top)

L-Clips (bottom) standard

Optional: J - Channel (bottom)

Sizes and Tolerances

Maximum 42" wide x 120" high or 114" wide x 48" high tolerances. The Model KSP panel is built to a plus or minus 3/16-inch tolerance for length, width and squareness.

Note: The perforated co-polymer has a higher expansion/contraction rate than metal when subjected to temperature changes. Where panels are placed side-by-side, install with a 1/8-inch gap between edges to allow for expansion.

Mounting