Kinetics Noise Control - Vibration Isolation, Room Acoustics, Seismic Restraint Your source for Noise, Acoustic, Vibration and Seismic control systems, 1-877-457-2695
Home > Interior Room Acoustics > QuietTile

Kinetics™

QuietTile Acoustical Ceiling Tile

QuietTile Acoustical Ceiling Tile

Searching for a ceiling tile product that improves speech privacy and reduces noise intrusion through a lay-in ceiling? Does your design require matching existing lay-in tiles?

QuietTile provides a high CAC rating, 49-51, with the finish tile of your choice.

Designer can select from any readily available lay-in ceiling tiles.

Kinetics’ QuietTile uses additional mass and sound damping to produce a composite ceiling tile designed to reduce sound transmission through a lay-in ceiling. QuietTile sound control ceiling is installed in a standard ceiling grid and can be selected to match most acoustical QuietTile Acoustical Ceiling Tile ceiling tiles. Kinetics bonds the composite viscoelastic damping layer and gypsum board to the back of a standard ceiling tile selected by the designer.

QuietTile composite lay-in panel can be designed for a reveal 9/16" (narrow) grid or 15/16" standard grid. Tiles are available in nominal 24" x 24" and 24" x 48" sizes.

Achieve sound control and speech privacy in a lay-in ceiling system where conventional ceiling tiles fail.

Description

Composite ceiling tile designed for improved sound transmission loss.

Composition

Note: The Kinetics standard facing tile is Armstrong Cortega unless otherwise specified

QuietTile Acoustical Ceiling Tile with 1/2-inch gypsum board and sound damping layer

Acoustical Performance

Ceiling Attenuation Class (CAC), QuietTile tested with Armstrong Cortega facing tile - CAC 49.

QuietTile with optional 1-inch (25 mm), 3 pcf fiberglass backer with Armstrong Cortega facing tile - CAC 51.

Fire Class Rating

Class A per ASTM E84

Applications

Installation

For achieving maximum noise reduction it is important that noise "leaks" through the ceiling; supply/return vents and open light fixtures be treated. Ask Kinetics for methods of treatment based on your ceiling design.

Select a suspension system for ceiling panel weights up to 3.5 lbs. per square foot.

Field notching of the backing layer may be required at tie wire locations depending on overall thickness of finish tile selected.

QuietTile Acoustical Ceiling Tile
Pricing and Quotations
 Tell a Friend
MADE IN USA