Model IsoLayment floor underlayment delivers noise
reduction between occupied spaces where hard floor
surfaces amplify impact noise. Direct tile, bond hardwood
or float engineered wood floors directly on Model
IsoLayment for a low profile and economical installation.
Manufactured from 98% post-consumer and post-industrial
recycled rubber, Model IsoLayment is the environmentally
friendly choice for commercial and multifamily projects.
Available in two product types
- IsoLayment BR for most finish floor assemblies
- Standard Thicknesses: 3mm (1/8"); 9mm (3/8")
- Roll Size: 48 inches wide x 75 ft. (3mm) and 25 ft. (9mm)
- IsoLayment HB for direct ceramic tile assemblies
- Standard Thicknesses: 5mm (7/32")
- Roll Size: 48 inches wide x 50 ft. (5mm) and 25 ft. (9mm)
- Note: Installation of ceramic tile requires the use of specified flexible grout and thinset materials
Product Features
- Meet and exceed IIC (Impact Insulation Class) building codes for multi-family buildings
- Manufactured from 98% recycled materials for contribution to LEED MR Credit 4
- Can be installed over plywood and concrete subfloors
- Low profile doesn’t compromise transition height
- Easy to handle and install 48" wide rubber mats
- Bond or "float" Hardwood Floors
- Model IsoLayment exclusive HighBond fibrous bonding layer far exceeds the tile adhesion shear
strength of other rubber underlayments (exceeds 90 psi for all test conditions and over 120 psi
under accelerated aging per ANSI A118.12 )
- Tile assemblies achieved a “residential” rating per the Robinson test (ASTM C627)
- Fast, lay-down installation with engineered wood and laminate floors
- Tape joints, add vapor barrier and pour concrete directly on Model IsoLayment BR
- Product stocked in Ohio and California for faster and less expensive shipping
