Your source for Noise, Acoustic, Vibration and Seismic control systems, 1-877-457-2695

Home > Seismic Design Manual > How to use this manual - P Section > Concrete Anchor Bolts (P10)

Concrete Anchor Bolts (P10)

Design and selection data for Seismically Rated Anchorage hardware used by Kinetics Noise Control makes up this section. Data here is of prime interest to installation contractors and design professionals involved in the restraint selection process.

General Description (P10.1)

(Under Construction) A general description of the anchorage hardware used by Kinetics Noise Control is provided in this section.

Submittal Data

KCAB (Wedge type Anchor Bolt) Submittal Data (P10.2.1)
Design information is provided in this section.
KUAB (Undercut type Anchor Bolt) Submittal Data (P10.2.2)
Design information is provided in this section.
TG (Anchor Bolt Adapter Grommets) Submittal Data (P10.2.3)
Design information is provided in this section.
KCCAB (Cracked Concrete Wedge type Anchor Bolt) Submittal Data (P10.2.4)
Design information is provided in this section.

Selection Information

KCAB Anchor Selection Information (P10.3.1)
Design Selection and guidance information to be used in conjunction the various anchors are summarized in this document.
KUAB Anchor Selection Information (P10.3.2)
Design Selection and guidance information to be used in conjunction the various anchors are summarized in this document.

Installation Instructions (P10.4)

Comprehensive Installation Instructions to be used in conjunction the various anchor types can be found in this segment of the chapter.